Question: Can I Use RAM With Higher Frequency?

Does MHz matter buying RAM?

RAM frequency is measured in MHz and usually immediately follows the DDR version in the RAM spec.

For example, 8GB DDR4-2400 RAM is running at a frequency of 2400MHz.

This is why though higher frequency RAM is technically faster, that additional speed often does not translate into better actual real world performance..

Can I use 2400mhz ram in 2666mhz?

If my motherboard supports ram up to 2400mhz, will the 2666mhz still work but bottle-necked at 2400mhz? As long as the speed is higher then you can run it. 2666mhz is just the maximum speed your ram will run at, but it can go any speed below just fine.

Can I use RAM with higher MHz?

Your computer will work just fine if you install the faster RAM. It will simply run at the slower 1333Mhz speed. Your motherboard will recognize those faster RAM sticks as being compatible (because they are) and allow the system to boot up and operate normally after you install them.

Can I put 1600mhz ram in a 1333mhz slot?

1600mhz RAM will work at 1600mhz, or any speed less than that. RAM speed is set by your motherboard and processor combination. In short, yes 1600mhz ram will work at 1333mhz just fine.

Can I use lower frequency RAM?

Yes, you can. A prerequisite first: BOTH sticks need to be of the same generation, e.g. BOTH have to be DDR3, DDR4, etc. If you got that nailed down, it’s pretty simple afterwards: you just plug both sticks into the system. The faster stick will operate at the frequency of the slower stick.

Is 3 sticks of RAM bad?

To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.

Can I use 2 RAM with different frequency?

You can’t add RAM of different sizes (frequencies/models/etc.) … If you install two RAM sticks of different frequencies, both of them will be working on the lowest frequency. So, if you Installed one stick with 1600Mhz and other with 2400Mhz, the latter will work on 1600Mhz, thus lowering its efficiency.

What happens if you put more RAM than supported?

14 Answers. Simple answer: It either will only see the max supported memory or it will not work at all. My gut feeling says two things: If it does work, you just will not see the extra memory, only the max the motherboard/chipset supports.

Is 2133 MHz RAM good?

Crucial memory is always reliable and a good value. 2133MHz is the default speed for the new Skylake chipsets, and there is no point getting 2400 or anything higher unless you plan on overclocking.

Is it better to have more RAM or faster RAM?

Faster RAM will give your PC better performance in certain specific benchmarks, but in terms of actual benefit to most users, having more RAM available is almost always better than having faster RAM.

Can I add 8gb RAM to 4gb laptop?

In technical aspect, a 8GB RAM stick can be added to a computer 4GB RAM as long as both of 8GB and 4GB have the same speed front side bus speed. For better performance, the both of RAM sticks should have also same size not only same speed. It means that, the second RAM stick should be 4GB instead of 8GB stick.

Why do motherboards have RAM limits?

Your Motherboard Has a RAM Limit Just because you can fit the sticks of RAM into your motherboard doesn’t mean your motherboard can use all of the installed memory. To determine if your motherboard is “seeing” all of your RAM, enter your computer’s BIOS.

What happens if RAM is faster than CPU?

If the RAM is faster than necessary, the CPU still waits that very specific time, and there is no improvement in system performance.

Is 1600MHz RAM good?

In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151. Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial.

Can too much RAM cause problems?

Adding additional RAM to any laptop generally increases power consumption by a measurable (if small) amount, but this shouldn’t be an issue for most users. It’s also better to have a bit too much RAM than too little, as whatever you gain in power savings you’ll promptly lose to increased disk paging.

Can I use 2 4gb and 2 8gb RAM together?

IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time. Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. … IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time.

Does RAM speed have to match CPU?

Just like the processor, memory runs at different clock speeds, check what speed the processor supports and match that to the RAM that you buy. These are the officially supported speeds by the processor but if you plan to be overclocking your CPU, you will also be increasing the clock speed of your memory.

Can I run 2400mhz RAM at 2133mhz?

Yes, you can. When the BIOS detects that the RAM is too fast for the memory controller or faster than the rest of the system memory, the fastest RAM will be clocked down to the speed of the lowest RAM. In your case, the CPU doesn’t support more than 2133 MHz so the additional stick will also be run at that speed.